80C51 1Header

TK87C752 80C51 Microcontroller, 64K Flash

Request for Product Information

To request information on the TK87C752 click this button:  Request Information O1


  • 8 Bit Microcomputer with 8051 architecture
  • 64Kx8 internal Flash, 256x8 RAM
  • Low standby current at full supply voltage
  • 0-20 MHz operation
  • Classic architecture instruction timing
  • 3 bidirectional ports (19 bits)
  • 24 pin, 300 mil DIP or 28 pin PLCC package
  • Built in power management
  • Two Wire Interface (TWI) (I2CTM compatible)
  • 16 bit timer/counter with auto-reload
  • 8-bit PWM
  • Fixed rate timer
  • 8-bit ADC with 5 channels
  • LED compatible outputs
  • Direct replacement for Philips 83C752 / 87C752 microprocessors
  • Implemented with the Tekmos Customer Configured Microprocessor (CCM) technology
TK87C752 pin 


General Description

The TK87C752 is a derivative of the 8051 microprocessor architecture. With 64Kx8 of mask programmed ROM, and 256x8 of scratchpad RAM, this part is a pin-for-pin replacement of the Philips 87C752 microprocessor.

The TK87C752 is intended to provide the 80C51 architecture in a small package and with a hardware Two Wire Interface (TWI). The integrated TWI interface allows the TK87C752 to operate as either a master or a slave on the TWI bus.

To achieve this, port P2, and 5 bits of port P0 were removed, along with the external bus control pins. This allows the TK87C752 to fit within either a 28 pin, 300 mil PDIP package, or a 28 pin PLCC package.

The 8051 architecture has been modified to provide a Two-Wire Interface (TWI). Starting with the basic 80C51 design, the serial port and the two timers in the 80C51 were removed and replaced with the TWI interface and its associated timers. The external interrupt pins and the timer gate and count pins were relocated from port P3 to port P1. The interrupt controller was simplified to provide only a single set of priorities.

The ability of the design to access external program and data memory was also removed, along with the PSEN, ALE, and EA pins.

The TK87C752 is built utilizing the Tekmos Customer Configured Microprocessor (CCM) technology. Refer to the CCM data sheet for details on creating other microprocessors.

I2C is a registered trademark of Philips Corporation. 



The data sheet is available here:  pdf TK87C752 (130 KB)

Product Change Notice Form:  pdf PCN 17006 (275 KB)

< Prev       Next >